2
3
1. Remove protective packaging.
2. Remove unit from shipping carton.
3. Remove all protective materials.
4. Check for shipping damage and loose or broken parts.
5. Read Owners Manual thoroughly prior to installation.
6. Install batteries in remote.
7. Determine placement location for the unit (See “Placement of
Unit” on page 9), plug the unit into a 110 volt outlet.
8. Be sure the main power switch (on back of unit - see page 5)
is in the ON position.
9. Using either the remote control or the
Power
button, turn the
unit ON. The display should look similar to below.
INSPECTION & INSTALLATION
OPERATION
1. Adjust the fan speed to your preference keeping in mind that
higher fan speeds will give better results.
2. Set the purifier controls anywhere from zero up to the total area
of the indoor environment.
Do not set the area indicated by the purifier above the square footage
(or square meters for international models) of the indoor area.
3. To operate the sanitize feature, press the sanitize button
until the desired time is reached (2, 4, 6, or 8 hours). The unit
will display SANITIZE and the remaining time in hours and
minutes (see below). Make sure the area is unoccupied before
using the sanitizer. To interupt the sanitize feature before the
timer reaches zero, press the
Purifier On/Off
button.
Sanitize Mode
Fan Speed (Max)
SANITIZE MODE: The unit’s display will change when the Sanitize function is
active. The fan will show maximum and SANITIZE will replace the purifier setting.
The amount of time remaining will depend on how long you have selected for the
Sanitize function to operate. The colon (:) will flash to indicate time being counted
down.
Time Remaining
Purifier Setting
Fan Speed
Purifier Coverage
NORMAL MODE: The unit’s display shows the fan speed (low to high), the
purifier setting (1 bar to 12 bars), and the purifier coverage in square feet for
U.S. models and square meters for international units.
Inspection & Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Your New Fresh Air by EcoQuest:. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Unit Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Settings and Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Maintenance and Service Reminders . . . . . . . . . . . . . . . . . . . . . . . . 7
LCD Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
General Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Placement of Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Optional EcoHelp Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Removing the Lint Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Removing the Purifier Plate & RCI
™
Target . . . . . . . . . . . . . . . . . . . 11
Removing the UV Bulb and Starter . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing the UV Lamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Installing RCI
™
Target & Purifier Plate . . . . . . . . . . . . . . . . . . . . . . . 12
Installing the Lint Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
INTRODUCTION
Congratulations, you have purchased one of the most effective,
technologically advanced air purifiers available. Your new
Fresh Air by EcoQuest is designed to provide years of trouble-
free, low maintenance operation. Be sure to read and follow all
service procedures outlined in this owner’s manual and to use
only genuine EcoQuest replacement parts available from your
EcoQuest Dealer.
If you have any questions concerning this or any EcoQuest
product, contact your EcoQuest Dealer.
Please record the name and phone of your EcoQuest Dealer:
Name _______________________________________________
Phone _______________________________________________
Please record the serial number of your Fresh Air by EcoQuest:
Serial # ______________________________________________
CONTENTS
To reduce the risk of electric shock, this equipment has a
grounding type plug that has a third (grounding) pin. This
plug will only fit into a grounding type power outlet. If the
plug does not fit into the outlet, contact qualified personnel
to install the proper outlet. Do not alter the plug in any way
.
This owner’s manual is also available online at:
http://www.ecoquest.com/ownersmanuals
