eCopy Hub Card ASY5091 User Manual
3
Connecting the network cables
The 3-port network switch enables you to connect the eCopy ScanStation and the image
RUNNER
to a
single network jack. If there is a second wall jack available, you do not need to use the internal 3-port
switch (this method is the preferred configuration).
To connect the network cables:
>
If there is a second network jack near the eCopy ScanStation
:
>
Connect the supplied long Ethernet cable from the network wall jack to the PC’s integrated
network port, as shown below. The internal 3-port switch is not required in this configuration.
ScanStation
PC rear panel
To wall jack
imageRUNNER
connections
Network port on
printer board
Uplink port
To wall jack
Integrated network port
Internal
3-port switch
>
If there is only one network jack
:
1.
Remove the copier’s network cable from the wall jack and connect it to the left port on the
internal 3-port switch.
2.
Connect the supplied long Ethernet cable from the network wall jack to the uplink port on the
right of the internal 3-port switch.
3.
Connect the supplied short Ethernet cable from the middle port of the internal 3-port switch to
the PC’s integrated network port.
ScanStation
PC rear panel
To wall jack
imageRUNNER
connections
Network port on
printer board
Uplink port
Integrated network port
Internal
3-port switch