eCopy Hub Card ASY5091 User Manual
2
Hardware setup
Safety instructions and warnings
Caution!
Expansion cards contain delicate integrated circuits. To protect them against damage from static
electricity, take the following precautions:
>
Always switch off and disconnect the computer and any attached devices from their electrical outlets
before attempting to work inside the computer.
>
Wear a grounding strap or touch an unpainted metal surface on the computer’s chassis before
touching anything inside the computer.
>
Place components on a grounded antistatic pad or on the bag that came with the components
whenever the components are separated from the system.
Network switch removal
The Touchstone Technologies 3-port network switch is installed inside the eCopy ScanStation PC before
the system ships. To remove the switch, follow the procedure below.
1.
Turn off the computer and unplug the power supply.
2.
Determine the location of the 3-port switch in your PC. The location may vary according to the PC
model.
3.
Open the case and remove the integrated 3-port switch card from the slot. Note that on some PCs
you may need to remove a riser card to gain access to the PCI slot.
3-port network switch