eCopy Hub Card ASY5091 User Manual
1
Introduction
The Touchstone Technology 3-Port Network Switch is distributed as an integrated component of eCopy
ScanStations. It is a self contained three port switch that fits into a standard, full height, PCI slot. The
board is self configuring and receives power from the host computer’s PCI Bus. The board is compliant
with FCC Class-B, VCCI, and UL standards.
Features
>
3 port 10/100 Integrated Switch with
Physical Layer Transceivers based on
Kendin S8993 chip
>
64K Byte of SRAM on chip for frame
buffering
>
1.0Gbps high performance memory
bandwidth
>
10BaseT, 100BaseTX modes of
operation
>
Support for UTP
>
Superior analog technology for
reduced power and die size
>
Supports port based VLAN
>
QoS Feature. Supports 802.1p based priority or port based priority
>
Indicators for link activity, full/half duplex
>
Unmanaged operation
>
Hardware based 10/100, full/half, flow control and auto negotiation
>
Wire speed reception and transmission
>
On chip integrated address Look-Up Engine, supports 1k absolute MAC addresses
>
Automatic address learning, address aging and address migration
>
Full duplex IEEE 802.3x flow control (Pause) with force mode option
>
Half duplex back pressure flow control
System requirements
>
One full height PCI slot
>
Category 5 Ethernet cables