11.3.2019
GSM BC englische Version 1.0 working copy - Google Docs
https://docs.google.com/document/d/1VKt6uoJvSfEkYLDzHNqqOVF-sEzni9rJ_CeRmnapthk/edit
47/53
OPERATION MANUAL GSM-BATCORDER
46
The microphone disc then is to be connected to the GSM-batcorder. Therefore you
have to lock the microphone plug to the microphone jack on the GSM-batcorder
without using any force or tools. Attention should be paid to a correct alignment of
plug and jack (red marks have to match). A twisted connection leads to a loss of
function.
This is a push-pull connector. Pull the plug at the knurled area to
unlock it. You must not twist it!
Installation of profile rail
The GSM-batcorder is fixed at the WTG-nacelle via a profile rail with a clip system
(top-hat rail). The profile rail is attached to the nacelle cover (from inside) with
dampers.
Lay down the rail at the chosen position onto the nacelle bottom and sketch the
position of the pilot holes for the screws (G2). Use the enclosed washers (G4).
Observe the proper distance to the microphone disc.
Corresponding to the illustration the profile rail and the fastening clip are mounted
and the GSM-batcorder can then be clicked into the fastener.
Fastening GSM-batcorder and rechargeable battery on the profile rail
Summary of Contents for GSM-BATCORDER 1.0
Page 54: ......
