11.3.2019
GSM BC englische Version 1.0 working copy - Google Docs
https://docs.google.com/document/d/1VKt6uoJvSfEkYLDzHNqqOVF-sEzni9rJ_CeRmnapthk/edit
35/53
OPERATION MANUAL GSM-BATCORDER
34
Remote Control of the GSM batcorder by SMS
Before you can use the SMS-function, all necessary steps from the
GSM-setup to a successful transmission of a test-SMS must have
been carried out. (See: SIM-card installation and GSM-TEST SMS).
When does the GSM-batcorder try to connect with the mobile network?
●
After the device got started by keystroke.
●
As soon as the GSM-batcorder changes from “SETTINGS” mode (green
display) to “TIMER ACTIVE” mode (yellow display).
●
If the end of the “SCANNING” mode has been reached (blue display) and the
GSM-batcorder changes into “TIMER ACTIVE” mode (yellow display) again.
When can the GSM batcorder be remotely controlled by SMS commands?
●
In all settings menus (green display), with one exception: As long as the
GSM-batcorder is in the GSM menu, no SMS can be received.
●
If the Timer is activated (TIMER ACTIVE – yellow display).
If the connection setup to the mobile network has been successful,
this is indicated with a “ G ” at the upper line of the menu.
From the beginning of the scanning mode to its end, the GSM-module
is deactivated! During that time no SMS can be received!
Important informations for the SMS control
●
If the connection setup is not possible or fails, the attempt is not repeated.
The GSM module stays offline until the GSM batcorder again tries to establish
a connection to the mobile network.
(See above: When does the GSM-batcorder try a connection setup to the
mobile network?)
●
Do not send a SMS shortly before the recording session starts. The SMS
communication within the GSM network can take several minutes under
unfavorable reception conditions respectively high network load. Thus the
Summary of Contents for GSM-BATCORDER 1.0
Page 54: ......
