11.3.2019
GSM BC englische Version 1.0 working copy - Google Docs
https://docs.google.com/document/d/1VKt6uoJvSfEkYLDzHNqqOVF-sEzni9rJ_CeRmnapthk/edit
41/53
OPERATION MANUAL GSM-BATCORDER
40
USB mode
Basics
With the GSM-batcorder you have the possibility to retrieve the data from the
SD-card without having to remove it. This is possible through the USB-mode even
while operating. Only during the scanning mode or while in a settings menu this
access is locked. You can connect an external end device to the USB-port and can
then retrieve the data from the SD-card. To connect the end device to the
GSM-batcorder you need an USB-cable with a Mini-USB-Plug for the
GSM-batcorder and the appropriate connector plug at the end device. (Not included
in delivery!)
So with a Raspberry Pi and the appropriate add-on program, it is possible to secure
the data from SD-card to an external data medium. On our homepage you can find
all information concerning this saving procedure, other developments and all
relevant downloads. (See: Support)
Access to the SD-CARD via USB-Port
The SD-card is either activated for internal access or for external access via an
external end device. The access through the USB-port is as following:
As soon as a USB-connection has been established (cable connected, external
device (computer or Raspberry Pi) activated), the GSM-batcorder builds up a
connection. At the status line the “ USB ” mark is displayed. The real data connection
can require a few seconds longer.
The external end device only gets access to the SD-Card, if:
1. You are at the MAIN menu, you can establish an access to the SD-card via
the USB-port by hand. More about that see below.
2. You are the TIMER-ENABLED mode, out of a recording session (yellow
display). More to it also below.
3. The GSM-batcorder has been turned off and you connect an active external
end device via USB with the GSM-batcorder. Also see further below.
First you have to connect an USB-cable. (At the status line the “USB” mark is
displayed.)
Summary of Contents for GSM-BATCORDER 1.0
Page 54: ......
