background image

1

Displaying Schedule

Press the 

NEXT

 key to display 

the Day and Night schedule for 
each day of the week.

Schedule

CANCEL

NEXT

SYSTEM

Day

Press the 

CANCEL

 key to return 

to normal operation.

AM

Press and hold the 

MENU

 key to 

display the schedule.

Mo

1

Low Battery Indication

When battery voltage drops from 
3.3V down to 2.5V, the LCD will 
alternately display “Lo” in place of 
the Inside temperature, and the 
LCD backlighting is turned off to 
extend battery life. The wireless 
communication continues to 
operate but the range is reduced.

Batteries should be replaced with 
AA alkaline or lithium batteries.

Inside

Mo

Schedule

AM

Set To

MENU

MODE

NEXT

ENTER

SYSTEM

HEAT

Day

Inside

Mo

Schedule

AM

Set To

MENU

MODE

NEXT

ENTER

SYSTEM

HEAT

Day

Slide the battery cover off and 
install two AA lithium or alkaline 
batteries.  Install the batteries 
with the positive terminals to 
the right as shown.  Replace 
the battery cover.

Installing Batteries

1

Calibrating the Temperature Sensor

Press the 

 key three times 

until the temperature is displayed. 

MENU

Inside

MENU

MODE

NEXT

ENTER

SYSTEM

Press the 

or 

 key to 

adjust the temperature to the 
temperature that the user feels is 
correct.

UP 

DOWN

Press the 

key to save 

and return to normal operation.

ENTER 

4

Summary of Contents for T200WLD









Reviews: