background image

INSTALLATION

11

Limited 5-Year Warranty

The 5-year warranty is limited to the repair or replacement of 
defective product due to parts failure or defective workmanship.

26072 Merit Circle #110 / Laguna Hills, CA 92653

949-916-0945 Fax 949-458-8502 / eControlsUSA.com

Controls Make The Difference

Controls

e

Optional Damper Control

An optional Damper Control, Model DCXX, is available 
when power actuators are required for heavy duty 
dampers with higher thermal insulation.

The Damper Control is installed in a separate electrical 
box and connected to the damper actuators and either 
24VAC or 120VAC depending on the actuators and 
corresponding Damper Control being used.

See DCXX datasheet for more information.

The number of fan speeds has been set - Outlined in Step 4 if different than the default fan speeds (2). 

Turn on WHF and Test Operation

5)

Make sure the following has been completed before turning WHF On.

Test the WHF Operation

Turn WHF ON by PRESSING the TIMER SWITCH. Confirm WHF turned ON.

Turn WHF OFF by PRESSING the TIMER SWITCH. Confirm WHF turned OFF.

Change the fan speed by PRESSING the SPEED SWITCH and select the next available speed. 
Confirm WHF changed speeds. Repeat as necessary depending on number of fan speeds available.

Summary of Contents for FC3JU









Reviews: