background image

HOMEOWNER

Link

Menu

ed

Set To

Cool

Indoors

Econo

Cooling

ON

oF

Outdoors

WHF

Smart

The wireless WHF control can be easily added using 
the upgrade kit, Model RTAKS. No additional line 
voltage wiring is required. Plug&play connections 
makes upgrading simple and quick.

RTAKS Add-On Kit

For WHF control using the wall timer 
or the wireless remote control.

Timer or temperature control.

Welcome, mikeb

Whole House Fan

Smart

Account Info

Fan

C

Log Out

Copyright 2018

Fan Status:

OD Temp:

Fan Speed:

Attic Temp:

Indoor Temp:

Control:

Set To:

Home

Off

o

85 F

High

o

97 F

o

97 F

Timer

3 Hours

WiFi WHF control can be easily added using the 
upgrade kit, Model iMAKS. No additional line voltage 
wiring is required. Plug&play connections makes 
upgrading simple and quick.

iMAKS Add-On Kit

For WHF control using the wall timer 
or WiFi App.

Temperature control improves comfort and energy 
efficiency by never overcooling the space and the 
fan only runs when needed.

Install the outdoor temperature sensor to delay 
whole house fan operation until the outside 
temperature is cool enough to provide cooling.

Timer or Temperature control. 

Install the outdoor temperature sensor to delay 
whole house fan operation until the outside 
temperature is cool enough to provide cooling.

Phone not included

EASILY ADD WIFI OR WIRELESS CONTROL

Add Wireless Control

Add WiFi Control

Available through eControls at 949-916-6701

www.eControlsUSA.com

Add temperature control by installing the indoor 
temperature sensor. Temperature control improves 
comfort and energy efficiency by never overcooling 
the space and the fan only runs when needed.

3

Summary of Contents for FC3JU









Reviews: