HOMEOWNER
i
Before operating your Whole House Fan (WHF), always OPEN windows. See the WHF
Owners manual for more information. Your A/C should be off during WHF operation.
To change the Timer Hours, PRESS and HOLD the
TIMER
to select the timer period. The LEDs
will cycle from 2 to 4 to 6 to 8 hours while the Timer
switch is pressed. RELEASE the TIMER
when
the desired number of hours is indicated. If the WHF was
on, it will remain on. If the WHF was off, setting the timer
will turn the WHF on.
SWITCH
SWITCH
To view the WHF speed, PRESS the SPEED
and the LED corresponding to the selected speed will be
lit. The wall timer will then return to displaying the timer
hours.
SWITCH
To change the WHF speed, PRESS and HOLD the
SPEED
to select LO, MED or HI speed. The
LEDs will cycle between the available speeds while the
Speed switch is pressed. RELEASE the SPEED
SWITCH when the desired speed is indicated.
SWITCH
The Speed switch will not change the speed and the
speed will remain as HI.
The Speed switch will cycle between LO and HI.
The Speed switch will cycle between LO, MED and HI.
Changing the Timer Hours
Viewing the Selected WHF Speed
Changing the WHF Speed
If you have a Single Speed WHF:
If you have a Two-Speed WHF:
If you have a Three-Speed WHF
When the WHF is OFF, the LEDs on the wall timer are
not lit.
Turning the WHF ON or OFF
To turn the WHF ON, press the TIMER
. The
WHF will go ON and an LED will indicate the number of
timer hours set, either 2, 4, 6 or 8.
To turn the WHF OFF, press the TIMER
. The
WHF will go OFF and no LEDs will be lit.
SWITCH
SWITCH
The wall timer remembers the last timer setting and
when the WHF is turned on, the wall timer will use this
timer setting.
2
