Econo-Wrap EW-1800T, Operator'S Manual, Page: 65 / 128

Self - loading Bale Wrapper EW - 1800T
65
8.2. Operating modes
The bale wrapper can be controlled using one of three modes:
•
AUTO mode
Select the “ AUTO ” mode to perform all the movements of individual sections in one full cycle after pressing the start.
•
SEMI - AUTO mode
Select the “ SEMI - AUTO ” mode to operate the machine in two ways. In the first one, you click on the selected control
signal for the operation to take place automatically and once finished, wait until you input another signal to be
executed. The individual sections are executed separately after they are started. In the other one, you hold down
the button for the operation to be carried out until the button is released. The operation is terminated at any time
after removing the finger from the button.
•
MANUAL Mode
In the “ MANUAL ” mode, all operations are confirmed by the operator who holds down a control button for the section
required. Removing your finger from the button terminates the operation of the section.
8.3. Control panel operation
The control unit is switched on automatically as soon as the power is connected. The screen will display the start sequence,
the name of the company with the address, and when finished, a message prompting to confirm that the bale lift lock has
been removed, see Section 6.4 Figure 21.
Caution!
It is forbidden to operate the lift actuator with the lift lock on, as it can cause damage to the machine.
Once the lift lock is removed and confirmed, the main screen with basic information is displayed.