Econo-Wrap EW-1800T, Operator'S Manual, Page: 42 / 128

Self - loading Bale Wrapper EW - 1800T
42
The operation of the bale tipper depends on the position of the adjustable arm (1). When the arm is in the horizontal posi-
tion, the bale will roll down behind the bale wrapper (Figure 24), while if the arm (1) is in the vertical position (Figure 25),
the bale will roll down to the side.
The procedure for switching over the bale unloading way:
•
Lift the cradle frame.
•
Remove the safety locking pin.
•
Switch the adjustable arm.
•
Mount the safety locking pin.
•
Lower the cradle frame.
To change the position of the adjustable arm, the cradle frame needs to be lifted and the adjustment pin removed.
Figure 26 Bale lift arm adjustment
(1) frame, (2) buffer, (3) adjustable arm, (4) lock screw, (5) buffer fixing
Customise the bale lift arm to the size of the baled crop. Setting the adjustable arm (3) ensures the proper loading of the
bales onto the table roller assembly. Depending on the length of the bales, set the buffer (2) so that it is in the middle of
the table roller assembly when the bale is loaded. The position of the adjustable arm (3) depends on the diameter of the
baled crop. Small diameter bales are loaded when the arm is at its shorter setting, whereas larger bales –
at its longer one.
The adjustable arm (3) must be locked with the screw (4) against being pulled out.