Econo-Wrap EW-1800T, Operator'S Manual, Page: 46 / 128

Self - loading Bale Wrapper EW - 1800T
46
6.7.2 Adjusting film tension
Figure 29 Film tension adjustment
(1) pressure screw, (2) jam nut, (3) film
A sequence of operations for film tension adjustment. Find out the current degree of film tension by ways described
in Section 6.6.1.
1. Loosen the jam nut (2) on the pressure screw (1).
2. Adjust the screw pressure by checking the film resistance (3).
- If the film tension is too high, lower the screw by turning the lever (1) to the left.
- If the film tension is too weak, lift the screw by turning the lever (1) to the right.
3. Tighten the jam nut (2).
4. Check the tension of the film and repeat the procedure if necessary.