78/83
Version 1.0
Cardio
Cardio
Cardio
Cardio----M Plus
M Plus
M Plus
M Plus Operation Manual
Operation Manual
Operation Manual
Operation Manual
1) Maintenance And Cleaning
There are various ways to keep the Cardio M Plus clean and well-maintained. This
section outlines several actions that could damage or stain the machine permanently
and thus need to be avoided by operators of the device. If unapproved materials that
may cause damage to the product were used, the product warranty may not be
honored even though the period of guarantee may not have been expired.
WARNING
-
Check main unit and electrodes thoroughly after cleaning.
-
Do not use old or damaged equipment on patients!
To keep the machine clean, apply Isopropyl alcohol (consisting of 70% solution in
water) on a soft cloth and scrub the body and the measuring electrodes with the
warm water once a month. Do not use lacquer, thinner, ethylene, or the oxidizing
substance.
Keep the cable from dust or stain. Wipe the cable with a cloth that is wet with
warm water (40
°
C/ 104 F), and with Isopropyl alcohol (consisting of 70% solution in
water) once a week.
Do not soak the device and its cables into any liquid or detergent. Keep the
machine and its cables away from any liquid.
Disposal Of Your Old Appliance
1. All electrical and electronic products should be disposed separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
2. Correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
3. For more detailed information about disposal of your old appliance, please contact
your local government office, waste disposal service or local distributor where the
product was purchased.
2) Regular Check-Up
Perform the safety inspection on the Cardio M Plus periodically (at least once a year).
See the service manual (provided by Medical Econet GmbH upon receipt of written
request) for details on the inspection of Cardio M Plus.
3) Trouble Shooting
(1) When nothing or blurred out lines are bring printed, during print out operation.
The upper cover of the printer may not have been closed properly. Check and close
the upper cover completely before using the machine.
(2) When the device is powered by the battery instead of AC power, the buzzer rings
for three times consecutively and the following message is displayed on the screen: