34/83
Version 1.0
Cardio
Cardio
Cardio
Cardio----M Plus
M Plus
M Plus
M Plus Operation Manual
Operation Manual
Operation Manual
Operation Manual
2) Basic Setup
General
When the device is on, the current configuration values of the system will be shown on
the LCD in the order of the heart rate, patient information, time, battery status,
sensitivity, printing speed, application of the base line filter, application of the
electromyogram filter, printing channel configuration, and selection of the rhythm lead.
These configuration values can be changed using either a rotary key or touch screen.
With the rotary key, the desired menu and changed configuration values can be set
easily.
Same functionality can also be achieved with the touch screen by pressing and
changing the desired information on the LCD.
1. Changing The Configuration Value With The Rotary Key
In this case, please follow these steps: enter Menu Mode, navigate and select Menu
and then change values.
-
Entering Menu Mode: Operate by rotating the rotary key clockwise or counter-
clockwise.
- Menu Navigation: Operate by rotating the rotary key. Menu movement will occur in
the same direction as the direction of the key’s rotation.
- Menu Selection: Initiate by pressing the rotary key. Menu box for setting of the
selected menu will be displayed.
-
Modifying setting values: Move to desired setting, then modify & select values in the
same manner as menu movement shown above. If there are any previously set values,
setting the menu box with the previous value will appear. If there are no OK buttons,
setting the menu will automatically close and return to setting the menu display. If
there are a lot of setting values, enter them all, then click on the OK button to indicate
data entry is complete to close the menu box.
2. Changing The Setup Value With The Touch Screen
You select Menu and change the setup value.
-
Select Menu: You could select the menu by touching the screen. Unlike the rotary key,
the setup box appears when you select Menu.
-
Change the value: You need to touch the item on the screen to select.
(In the event of system configuration, you should use only the rotary key to set up a
value.)