EcoNet Cardio-M Plus Operation Manual Download Page 66

Page: 66 / 83

66/83

Version 1.0

Cardio

Cardio----M Plus

M Plus

M Plus Operation Manual

Operation Manual

②

Lead Fault Signal Display Setting

When there is a Lead Fault event, this setup sets whether the “Lead Fault” message
will be displayed on the LCD screen of the device or not.

Selecting [L/F] menu will switch between ON and OFF in the menu, with ON turning
on the message display and OFF switching off the message display.

The following message for Lead Fault will be shown with affected channels:

Note

If the RL lead becomes faulty, the device will display a message saying all
leads are faulty (“Lead Fault! All Leads.”)

If a Lead Fault occurs during monitoring or recording, a buzzer alarm will
sound and the message box will pop up.

No pacemaker signal may be detected. Additionally, if a Lead Fault occurs,
please re-measure the EKG as it could have affected the measurement by
the device.

Lead Fault! All Leads.

Summary of Contents for Cardio-M Plus




















































































Search results

Summary of Contents for Cardio-M Plus

Reviews:

EcoNet Cardio-M Plus, Operation Manual, Page: 66 / 83

Search results

Summary of Contents for Cardio-M Plus

Reviews: