EcoNet Cardio-M Plus Operation Manual Download Page 24

Page: 24 / 83

24/83

Version 1.0

Cardio

Cardio----M Plus

M Plus

M Plus Operation Manual

Operation Manual

4) System Installation

Precautions For Installation

While installing Cardio M Plus, please pay attention to the following items:

- Use the equipment between the ambient temperature 10 to 40

℃

(50 to 104

℉

) and

humidity 30 - 85

％

- Check the power cord is properly connected, and the probe carefully handled.

- Do not plug multiple cords in a power outlet.

- Install and operate Cardio M Plus unit on a flat surface.

- If you experience noise, ground the device.

- Do not use a power cord that may make a connection noise.

- Device preference will be recorded in the internal memory even when it is off.

- Prevent any shock or excessive force that may cause damage to the device.

- Place the device away from any dust or flammable materials.

Power Connection

The equipment needs electrical power to operate. Plug in one end of the power cable
to wall socket and the other to Cardio M Plus.

Patient Cable Connection

- Connect the patient cable to the patient cable connection port on the right side of
the body.

- Connect limb electrodes to RL (N), LL (F), RA(R), and LA (L) leads of the patient cable

and chest electrodes to V1 (C1), V2 (C2), V3 (C3), V4 (C4), V5 (C5), and V6 (C6),
respectively.

Paper Installation

- Push the printer cover release button to the right to open the printer door of the
Cardio M Plus. Install EKG paper with the side to be recorded appearing on top. Close
the cover to finish the paper installation process

Summary of Contents for Cardio-M Plus




















































































Search results

Summary of Contents for Cardio-M Plus

Reviews:

EcoNet Cardio-M Plus, Operation Manual, Page: 24 / 83

Search results

Summary of Contents for Cardio-M Plus

Reviews: