and press left or right key, it will switch video
resolution circularly by the sequence “by
source<> by native TV<> 480i<> 480P<>
576i<> 576p<> 720P<> 1080i<>1080P”.
This effect is equal to press V.Format Key
under Full Screen and their last setting saving
will be efficient for each other’s. By Source
means system will set the video output
resolution according to the program it’s playing,
different resolution programs switching perhaps
will makes TV screen flickering. By Native TV
means system will be according to the HDMI
TV’s max supported resolution to set its
resolution, if system is not connected to a HMDI
TV, it will set resolution to be default
●
Aspect Mode is for switching the screen aspect
ratio mode. Now we provide below options: 4:3
PS / 4:3 LB / 16:9/Auto. You can press
[Left/Right] key to select each mode circularly.
16:9 will provide user pillar box mode it means
user use 16:9 TV to display but need to see a
4:3 full display picture. System will force press
wide screen picture to be narrow and there’re
black band on left and right site. Auto means
system won’t do any aspect ratio translation,
16:9 picture source will be good display on a
16:9 TV but will be too narrow on a 4:3 TV, and
4:3 picture source will be too wide in a 16:9 TV
but will be good display in a 4:3 TV.
●
Video Output: Press [Left/Right] to select RGB
or YUV.
●
Digital Audio Out is for setting the both SPDIF
and HDMI’s digital audio output mode, it has
options LPCM Out, Auto, You can press
[Left/Right] Key to select each mode circularity.
LPCM Out means system will decode no matter
AC3 or PCM audio track data to be LPCM,
digital audio decoder or HDMI TV will get LPCM
digital audio data. Auto means system will
detect which the connected HDMI TV can
decode and then output that data. If HDMI TV
can decode AC3, system just output RAW data,
if HDMI TV can decode LPCM only, system will
just decode AC3 or LPCM to be LPCM and
then output.
●
Press [exit] key to draw back from “TV System”
menu.
Ethernet Setting
1. Select your Network Type as Wired or Wireless, if
you select Wireless, can configuring WiFi (wireless)
as the following step:
Select Wireless on Default Network Type item.
Press [red] button the wireless LAN network list will
appear, Select you WiFi network and press [ok]
button, at last input password.
Press [OK] button on Connect item to start
connecting.
In this menu you may assign a dynamic IP address
to the digital receiver. To do so, select the DHCP
On.
If you have a static IP address, unselect the DHCP
Enable, then the IP Address, Subnet Mask,
Gateway and DNS options become enabled. You
have to set these options according to your IP
address.
WiFi Manager: Insert WiFi equipment first, then
search available Enter net signal, input the
password to connect with network.
Time Setting
When you enter to “Local Time Setting” menu, you
will see the screen like below:
