Basic Operations
Turn on STB
First, press the [Device’s Main Power] to turn on the
unit. When the STB is first used, there will play the
first channel from the default Channel List. If the
STB is not first used, STB will play the same
channel as last time before turning off.
Power
●
Press [Power] Key can enter the Standby state
●
In Standby state, press [Power] Key again can
call back the unit and go on play the previous
channel
●
User can also disconnect the device’s main
power to end the Standby state.
Channel Up/Channel Down
In full screen, press [CH+/CH] to change channel.
Volume Up/Volume Down
In full screen, press [VOL+/VOL] to adjust volume.
Number
In full screen, use number key and press [OK] on
the Remote Control Unit to change channel.
Mute
Press [MUTE] key to mute the sound and the screen
will show up mute OSD. Press [MUTE] key again to
restore sound.
Pause
In playing mode, press [Pause] key, the picture will
be paused, but the sound of the channel will still
continue. Press [PLAY] key again, the screen’s
picture will skip over to the current playing picture,
and the sound of the channel will corresponding
playing.
Recall
Press [RETURN] key will directly switch to the
previous channel that you played before current
channel.
Favorite
In full screen, press [FAV] key, it will display a
window of “Favorite list” on the left of the screen,
which you can watch like below.
●
In the window of " Favorite list ", you can move
highlight by press [Channel Up/Channel Down]
key to select favorite Channels.
●
In the window of ” Favorite list ", you can press
[Left/Right] key to select favorite groups
Pressing [P/P+] keys can implement the
“Page up/Page down” function
●
Press [Exit] key to exit the current window.
.
Audio
●
In full screen, press [AUDIO] key can open the
“Audio” window on the screen.
●
You can modify the audio track by press
[Channel Up / Channel Down] key and modify
the audio mode by press [Volume Up / Volume
Down] key.
●
Mode: Left/Right/Stereo/Mono
