DC 12V:
This is used to connect an external 12V adapter.
HDMI:
Audio and Video output socket for TV set with HDMI Input Jack only.
Ethernet:
(optional) Network port, you can get a new software updates from this port.
USB B:
USB 2.0 Host, connect to USB hard disk, or flash disk.
With External Audio / HiFi System :
To connect any external Audio HiFi system, the receiver has been
provided with RCA connector at the back of the receiver marked with AV OUT. Connect an RCA cable from the AV
OUT jack on the back of the receiver to the LINE, AUX, SPARE OR EXTRA input jacks on your HiFi System.
TV with Motorized System (DiSEqC 1.2):
Connect one end of your coaxial cable to the LNB IN connector on the
receiver and the other end to the REC or Receiver connector on the DiSEqC 1.2 motor. Connect the coaxial cable
from the LNB to the LNB connector on the DiSEqC 1.2 motor. All our receivers are designed to be DiSEqC 1.0
and DiSEqC 1.2 compatible. This allows multiple antennas to be connected to the receiver at the same time. If
you have two or more fixed antennas or LNBs, then we recommend you use a DiSEqC 1.0 switch. Connect the
coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch. Do the same for any
other LNBs that you have. Connect one end of a coaxial cable to the RF output connector of the DiSEqC switch,
connect the other end to the LNB IN socket on the receiver. To the digital receiver, you can connect either a single
satellite antenna directly or LNB of multifeed equipment
.
