Tonebusrt
In “Toneburst” item, you can press [Volume Up/
Volume Down]key to switch “Off/On” functions.
LNB Power
In “LNB POWER” item, you can press [Volume Up/
Volume Down] key to switch: ” Off
、
13v/18v
、
13.5V/18.5V ” functions.
TP Edit
When you enter to “TP Edit” menu, there will display
the screen like below:
•
In “Satellite” item, press[Volume Up/ Volume
Down]key to switch satellite that you want to
scan or press[OK]key to enter satellite list for
selection.
•
In “TP Index” item, you not only can use
[Volume Up/ Volume Down]key to select
transponder but also can use[Add] and
[Delete]functions.
•
When you press[Green] key, it will display
“New TP” in “TP Index” item; You should set
the parameters of “TP Frequency” and
“Symbol Rate” for this new transponder. The
parameters of “TP Frequency” and “Symbol
Rate” can set by number keys. The available
range are “3000~13450 MHz” and
“1000~45000Ks/s”.
•
When you press[Yellow] key, there will show
up a warning message for reminding whether
you will delete the current transponder or not.
If you select “Yes”, the current transponder will
be deleted, and the total account of
transponder will reduce 1 correspondingly.
•
When you press [Blue] key, there will show up
a warning message for reminding whether you
will delete all transponders or not. If you select
“OK”, all transponders will be deleted.
•
For the existed transponder, you also can use
number keys to modify the parameters of “TP
Frequency” and “Symbol Rate”.
•
When you complete your modification, Press
[Red] key, it will show up a dialog to ask you
scan mode, program type, scan type and NIT
Search on/off. After you set up, press [OK] key
to start scanning.
•
In the “TP Scan” item, press [Exit] key to exit
the scanning and save the current parameters.
Single Scan
•
Press [Red] key, it will show up a dialog
to ask you scan mode (means you want
to scan all channels or only scan free
channels), program type (means you
want to scan all channels or only scan
TV/Radio channels), scan type (means
preset scan, that is searching the existed
TP. Automatic Scan means blind scan. It
is no need existed TP info) and NIT
Search on/off. After you set up, press
[OK] key to start scanning.
•
Press [White] key into the blind scanning
immediately.
TP Scan
Press [Green] key to scan current TP’s programs.
Auto Diseqc
Press [Blue] key to run Auto DiSEqC function, it can
find the satellite connect to which port automatically.
Blind Scan
Press [White] key can directly into blind scan mode
to scan the current satellite.
Auto installation
