Installation & Operation Manual Proven Quality since 1892
ECON Hydraulic Actuator Fig.21401-21402
Rev.0
–
April, 2020
3
2
PRODUCT IDENTIFICATION
2.1
Product Identification
The product name plate is located on top of the connection flange. The name plate contains the
following:
2.1.1 Marking
•
ECON logo (trademark)
•
Figure number
•
Serial number
•
Actuator type
•
Standard Hydraulic working pressure
2.1.2 Certification
LRS Type Approval Certificate
2.2
Initial Inspection
Upon the receipt of the actuator, the user should inspect the condition of the product and ensure
that the product specification stated on the name plate matches with the order sheet.
•
Remove the packing wrap or wooden box carefully. Inspect the product for any physical
damage that may have occurred during shipment.
•
Check the product specification of the received product. If a wrong product has been
supplied, please immediately report this to the distributing company.
2.3
Storage
Actuators must be stored in a clean, cool and dry area. The unit should be stored with the top cover
installed and the connection ports plugged. Storage must be off the floor, covered with a sealed dust
protector.
