46
47
9 If you choose TLS:
a Load a user and root certificate on your computer. For help, see “Load a
Certificate” on page 50.
b Enter a User Name and Subject Name�
c For Validate Server Certificate, choose Yes.
Configure WPA or WPA2 Personal (PSK) Security With Funk
Use the following procedure to configure WPA-PSK or WPA2-PSK with Funk security.
1 Make sure the communications and radio parameters on your computer
are configured.
2 Make sure Funk is selected as your security choice�
3 Start Intermec Settings�
4 Choose Communications > 802�11 Radio > Funk Security�
5 Select the profile you want to configure.
6 For Association, choose WPA or WPA2�
7 For 8021x, choose None�
8 For Pre-Shared Key, enter the pre-shared key or passphrase�
The pre-shared key must be a value of 32 hex pairs preceded by 0x for a
total of 66 characters�
The value must match the key value on the access point� The passphrase
must be from 8 to 63 characters� After you enter a passphrase, the
i�roc® Ci70 -Ex internally converts it to a pre-shared key� This value must
match the passphrase on the authenticator�
9 Save your settings�
Configure 802.1x Security With Funk Security
Use the following procedure to configure 802.1x-WEP security with Funk security. ecom
instruments recommends that you use WPA2-802�1x instead of 802�1x-WEP if possible�
1 Make sure the communications and radio parameters on your computer
are configured.
2 Make sure Funk is selected as your security choice�
3 Start Intermec Settings�
4 Choose Communications > 802�11 Radio > Funk Security�
5 Select the profile you want to configure.
6 For Association, choose Open�
7 For Encryption, choose WEP�
8 For 8021x, choose TTLS, PEAP, or TLS�
9 If you chose TTLS or PEAP:
a Enter a User Name�
b For Prompt for Credentials, choose Enter credentials now�
c Enter a User Password�
d For Validate Server Certificate, choose Yes.
10 If you choose TLS:
a Load a user and root certificate on your computer. For help, see “Load a
Certificate” on page 50.
b For Validate Server Certificate, choose Yes.
c Enter a User Name and Subject Name�
11 Save your settings�
Configure LEAP Security With Funk
After you configure the communications and radio parameters on your mobile computer
and select Funk as your security choice, you can configure LEAP.
1 Start Intermec Settings�
2 Choose Communications > 802�11 Radio > Funk�
3 Select the profile you want to configure.
4 For 8021x, choose LEAP�
5 For Association, choose Open, WPA, WPA2, or Network EAP� Encryption
automatically defaults to TKIP if you choose WPA, AES if you choose WPA2,
and WEP if you choose Open or Network EAP�
6 For Prompt for Credentials, choose Enter credentials now�
7 Enter a User Name and User Password�
8 Save your settings�
Configure Static WEP Security With Funk Security
Use the following procedure to configure static WEP security with Funk. ecom instru-
ments recommends that you use WPA2-PSK instead of WEP if possible�
1 Make sure the communications and radio parameters on your computer are
configured.
2 Make sure Funk is selected as your security choice�
3 Start Intermec Settings�
4 Choose Communications > 802�11 Radio > Funk Security�
5 Select the profile you want to configure.
6 For Association, choose Open�
7 For Encryption, choose WEP�
8 For 8021x choose None�
9 Define a value for the keys you want to use. You can define up to four keys
(Key 1 through Key 4)� Enter an ASCII key or a hex key that is either 5 bytes
or 13 bytes long depending on the capability of the radio� Set a 5- byte
value for 64-bit WEP or a 13-byte value for 128-bit WEP� Hex keys must be
preceded by 0x and contain 5 or 13 hex pairs�
10 For Transmit key, choose the key you want to use for transmitting data�
11 Save your settings�
Use Open (No Security) Associations with Funk
Use the following procedure to configure your mobile computer for open security using Funk.
1 Start Intermec Settings�
2 Choose Communications > 802�11 Radio > Funk Security�
3 Select the active profile you are using.
4 For Association, choose Open�
5 For Encryption, choose None�
6 Tap OK� Your settings are saved�
Select Microsoft as Your Security Choice
The default security setting is Funk� If you want to use Microsoft Wireless Zero Con-
figuration (WZC) security, you need to select it as your security choice. After you select
Microsoft as your security choice, you will be prompted to save your settings and reset
the computer for your change to take effect�
With Microsoft as your security choice, you can configure:
• WPA or WPA2
• 802.1x
• Static WEP
