Ecom-D
Page 7
4. Power Supply
The Ecom-D comes with an external charger. The analyzer can also
be powered via the internal battery (6 V; 3.8 Ah). The battery should
be recharged as needed (Indicted by a warning sound and display
light). The battery charging status can be by checked looking at the
voltage indication on the display (menu "
Control
" - Info key). The bat-
tery warning is activated when <Accu> is lower than 5.9 V.
At 5.8 V, the battery does not have enough power to operate the ana-
lyzer. At this point, the instrument must be charged via the external
charger.
5. Data Memory
The multi-media card enables the storage of measurements. The
measurement results are written in a text file (J2KDV.txt). Data format
information can be found in the appendix. The files can be transferred
to a PC via the memory card.
In order to use the memory card function:
- The card must have at least 32 MB of memory, with a maximum of 2
GB
- The card must be formatted on 16 bit FAT
- It must be either an SD or MM card from rbr
- The PC must have a card reader from ECOM, Belkin, or SanDisk
Used batteries can either be returned
to Ecom or taken to local recycling centers!
