Page 26
ecom-CN
Hint: If you have several instruments of the same type, you can locate an error by
exchanging the accessories (probe, hose, temperature sensor etc.).
If further questions or problems should arise, please contact the next authorised ser-
vice centre.
My instrument cannot be
switched on!
My instrument does not print!
Can I change the printout?
- Please check the mains cable
- Please check the fuse
- Please check mains connection (Plug socket
switched on?)
- Please load the accumulator min. 8 hours
(Accumulator could be over-discharged)
Please check whether the printer paper is correctly
inserted. The thermal printer writes only on the ther-
mally sensitive side. Please use always the correct
paper for the printer, you will prevent defects at the
printer. Please make sure that the printer is clean (no
chads in the drive).
Please contact the next authorised service centre, if
you want to change the printout.
Summary of Contents for CN
Page 1: ...Operating Instructions ...
