Ecolab Lubo-DryExx -Basic, Operating Instruction

Page: 32 / 42

417101633_DryExx_Basic - 32 - Rev.: 6-02-15
6.2.3.1.4 Archive of switch off
Fig. 6.11

Scroll the last switch off actions

Button „  or  “

Jump to screen „Archiv menu“

Button“ESC”
After leaving screen “Archive of the year” you come back to “Archive selection”
(see chapter 6.2.3.1 ).

To leave screen "Archive selection"

Button "ESC"
After leaving screen “Daily archive” you come back to the "Main menu" (see chapter 6.2.3 )

Jump to screen "Configuration menu" (see chapter 6.2.3.2 )

Button "2"
6.2.3.2 Configuration menu
NOTE
Flashing parameters must be confirmed using „ENTER“, even if no amendment is carried
out
Fig. 6.12
• Jump to screen "gen. configuration"

Button "0"
6.2.3.2.1 Gen. Configuration
Fig. 6.13 Screen “generaly configuration 1“:
• Number of packages per impulse of the optional meter
• System pretensioning time
• System bleeding time

Leave screen and go back to "Configuration menu"
(see chapter 6.2.3.2 )

Button "ESC"

Jump to screen "gen. Configuration 2" (see Fig 6.14)

Button "  "
Fig. 6.14 Screen “generaly configuration 2“:
• Delay time empty detector unit

Leave screen and go back to "Configuration menu"
(see chapter 6.2.3.2 )

Button "ESC"

Jump to screen "gen. Configuration 3" (see Fig 6.15)

Button „  “

Jump to screen "gen. Configuration 1" (see Fig 6.13)

Button „  “
Fig. 6.15
Screen “generaly configuration 3“:
• Number of impulses for the optional oval wheel meter per
quantity of belt lubricant set
• Quantity of belt lubricant for input of impulses for the optional
oval wheel meter

Leave screen and go back to "Configuration menu"
(see chapter 6.2.3.2 )

Button "ESC"

Jump to screen "gen. Configuration 4" (see Fig 6.16)

Button „  “

Jump to screen "gen. Configuration 2"

Button „  “