Instruction Manual ecoQ Rena
|
43
O
peration Instructions
Assemble the unit
Note:
Ensure that the handheld vacuum cleaner is
not connected to the charger before assembling the
extended tube.
1. Take the handheld vacuum cleaner, extended tube
and floor brush out of the box.
2. Insert the extended tube into the suction inlet of the
handheld vacuum cleaner and you will hear the “click”
when the extended tube is assembled correctly.
Please make sure that the extended tube is inserted
correctly before using the upright vacuum cleaner.
3.
Connect the floor brush to the extended tube. Please
insert the extended tube into the floor brush and
push the handheld vacuum cleaner toward the floor
brush firmly.
Detach the handheld vacuum
cleaner from the unit
Note:
Ensure that the unit is not connected to the
charger before detaching the handheld vacuum
cleaner.
1. To remove handheld vacuum cleaner from the unit,
push the extended tube release button to pull out the
extended tube from the handheld vacuum cleaner.
Grasp the handle of handheld vacuum cleaner and
pull out of the extended tube
2. You can use the handheld vacuum cleaner on its own.
If you need to reassemble the unit, please refer the
instructions in “assemble the unit”.
Charging your vacuum cleaner
Note:
The handheld vacuum cleaner and power floor
brush will not work while charging.
1. Place the unit or handheld vacuum cleaner near an
electrical power outlet and plug in the charger.
2. Connect the charger to the battery. The battery status
indicator lamps will light up to indicate that the
vacuum cleaner is properly connected to the charger
and that the unit is being charged. When it’s fully
charged, all of the 3 lamps will be turned off.
Use the handheld vacuum
cleaner
Note:
Please disconnect the charger before using
the vacuum cleaner. If the vacuum cleaner is being
charged or has too low battery status, the vacuum
cleaner and floor brush will not work.
1. The handheld vacuum cleaner can be used on its own.
The nozzle and crevice nozzle can be attached to the
handheld vacuum cleaner directly.
2. Press the power switch to alternate between settings
I (normal power), II (max power) and off.
