Ecodhome 01335-1910-00, Installation Manual

Page: 21 / 23

19
Operation
The Illumination Sensor is designed to monitor the
illumination of the environment into which it is placed.
The illumination reading can be sent to gateway on
a regular basis. If illumination reaches set points,
the sensor will send alerts to associated devices for
further action (such as switch on connected lightings).
The Illumination Sensor is suitable for use in indoors
only.
Troubleshooting
Symptom Cause of Failure Recommendation
LED is not displayed. 1. Run out of bat-
tery power.
2. Check if cor-
rect battery polarity.
1. Replace battery.
2. Refit the battery
with correct polarity.