@2021 EcoAir
-
V1.4
Page 9
All rights reserved (E&OE)
OPERATION
ON/OFF
TO
OPERATE
UNIT
•
Always place the dehumidifier in an
upright position on an even level
surface.
•
Plug the dehumidifier into the mains
socket, the standby mode indicator
will remain on whilst the dehumidifier
is plugged in to the mains.
•
The dehumidifier performs best at a
minimum ambient temperature of
15ºC . Where ambient temperature is
below 15ºC it will need to go into
defrost mode periodically to preserve
the life of the compressor.
•
Press the ON/OFF button to operate
the dehumidifier.
•
Operate within an ambient tempera-
ture of 5°c to 35°c.
1 WATER DROP / 2 WATER DROP
1 Drop
•
Select
for a Pre
-
set target
humidity of 60%. The humidity
setting can be manually ad-
justed by pressing the humidi-
ty button.
2 Drop
•
Select
for a Pre
-
set target
humidity of 40%. The humidity
setting can be manually ad-
justed using the humidity
button.
Tip:
The dehumidifier is pre
-
set to
60%RH. It will not immediately
operate if your environment is
below 60%RH. Change the hu-
midity setting to below the
ambient humidity to begin oper-
ation.
HUMIDITY BUTTON
•
Select for the desired humidity.
•
touch this button to change the set
humidity.
The set humidity range is 20%
-
25%
-
30%
-
35%
-
40%
-
45%
-
50%
-
55%
-
60%
-
65%
-
70%
-
75%
-
80%
-
85%
-
90%
-
95%.
There is an active humidistat which shows the actual
humidity level (%RH) in the environment when the
dehumidifier is running.
The display will show the actual humidity in the room a
few seconds after the humidity level is set on the con-
trol panel.
LAUNDRY MODE
•
Press the mode button until the Laundry
Symbol appears on the display screen.
•
The dehumidifier will operate continu-
ously at its maximum dehumidification
settings until the setting is changed or
the water tank is full.
•
Whilst in Laundry mode the humidity
setting can not be changed.
Note: If connected to a hose pipe for continuous drain-
age the dehumidifier will continue to run on its maxi-
mum dehumidification settings.
