@2021 EcoAir
-
V1.4
Page 8
All rights reserved (E&OE)
CONTROL PANEL
1)
Power Button
2)
Power Indicator
3)
Mode
4)
Fan Speed/ChildLock
5)
Humidity
6)
Timer
7)
Sleep
9)
Humidity Display
8)
Water Tank Full
1.
Power Button
-
Turns dehumidifier
ON
or
OFF
. The dehumidifier is also pre
-
set to operate on high fan speed
and on One Water Drop Mode. To turn off the dehumidifier press the power button, the compressor will
stop, but the fan will continue to run for a further 10 seconds.
2.
Power/Humidity Indicator
-
Once turned on one of 3 coloured lights will appear indicating the current
ambient humidity in your environment. Coloured indicators for your ambient humidity; Blue denotes
< 40%RH, Green denotes 40
-
60%RH, Red denotes > 60%RH.
3.
Mode Button
-
Pre set modes, select 1 Water Drop for a target of 60%RH, 2 Water Drops for 40%RH and
Laundry mode for laundry drying or continuous running.
4.
Fan Mode/ ChildLock
-
Select for High or Low fan speed. Press and hold this button for 3 seconds to toggle
the child lock function.
5.
Humidity Button
-
Hold down for 5 seconds, to display the
ambient temperature
. Tap to set your desired
humidity level—each tap will increase the humidity by 5%RH up to maximum of 95%RH.
6.
Timer key
-
Select timer ON or OFF. The timer can be set on hourly intervals from 1 to 24 hours.
7.
Sleep Mode
-
Sleep mode will turn the sound and display light off and turn on the quiet mode.
8.
Water Full Light Indicator
-
Lights up when the water tank is full, missing or inserted incorrectly.
9.
Humidity Display Panel
-
The display on the dehumidifier by default shows the
ambient humidity
level
whilst the dehumidifier is running. It will also show the ambient temperature if you hold down for 5 seconds
(see 5 above).
Indicator
Description
Constant:
Humidity levels below 40% relative humidity.
Flashing Blue:
Auto Defrost / Protection.
Constant:
Above 40% and below 60% relative humidity.
Constant:
High humidity above 60% relative humidity
Flashing Red:
Indicates the water tank is almost full.
