@2021 EcoAir
-
V1
Page 9
All rights reserved (E&OE)
EMPTYING THE WATER TANK
1.
The Water Full/Check Indicator lights up when the water tank is full. The appliance will stop
operating. Allow to stand for approximately 10 minutes to ensure all water collected drips into
the water tank. Gently pull the water tank out.
2.
Lift by the handle gently.
3.
Remove the tank lid.
4.
Pour the water away
5.
Clean the water tank, restore the cover and handle.
6.
Insert the water tank back into to the correct position. The Water Full light indicator illuminates
if the water tank is not correctly in position. If this happens, reinsert again.
NOTE :
•
Clean the water tank with mild detergent if necessarily. Do not use solvent, abrasive or
hot water.
•
When cleaning the water tank, take caution to avoid damaging the float.
•
Do not tilt the dehumidifier when removing the water tank. This is to prevent water
leaking which may cause electric shock.
Pull water tank out
Lift by the handle
Remove the cover
Pour the water away
Restore the cover and the
handle
Insert the water tank
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
