© 2017 EcoAir 9 All rights reserved
CONTINUOUS DRAINAGE
Remove water tank from the dehumidifier and open the drainage cover from the side of the
unit. Install the drainage connector by screwing it clockwise onto the drainage outlet tightly.
2.
Insert the drain hose into the drainage connector and reinsert the water tank back into the
dehumidifier.
3.
Run the drain hose downwards. The drain hose can not be above the drainage joint. This will
cause flooding of your dehumidifier. Make sure the drain hose is not pressed in any way.
4.
When removing the drain hose, prepare a container to collect water from nozzle.
Note:
The drainage connector comes with a
rubber gasket preinstalled. If the rubber gasket
came out from the drainage join, please
ensure the rubber gasket is installed back in
place to prevent water leakage.
Water
Outlet
Drainage
Connector
Rubber
Gasket
