© 2017 EcoAir 8 All rights reserved
EMPTYING THE WATER TANK
The Water Full Indicator lights up when the water tank is full and the dehumidifier stops
operating.
Do not move the dehumidifier or remove the water tank when the dehumidifier is running, as
water may leak; causing damages to the dehumidifier or an electric shock.
Before removing the water tank leave the dehumidifier to stand for approximately 10 minutes
to ensure all water has dripped into the water tank.
To remove the water tank, slide it out gently by gripping the water tank from both sides and
lift carefully.
Pour the water away by tilting the water tank from the purpose
-
made outlet, (see step 2
picture) to the left side. Clean the water tank.
Reinsert the water tank to the correct position, as soon as possible to prevent water dripping
from the dehumidifier.
NOTE :
•
Clean the water tank with clean water if needed. Do not use detergent, solvent, abrasive
or hot water to avoid damaging the water tank or float.
•
Do not remove or damage the float in the water tank or the dehumidifier will not operate
properly.
•
The Water Full light indicator illuminates if the water tank is not correctly in position.
•
Do not tilt the dehumidifier when removing the water tank.
•
If the water tank is removed whilst the dehumidifier is running the fan will continue to run
for 3 minutes.
Slide water tank out
Hold the handle and
pour the water out
Slide water tank in
STEP 3
STEP 1
STEP 2
