Use the selection wheel to select the time when control of the comfort
temperature is to be started. On the bottom of the LC display a scale is
displayed to facilitate orientation (long marks = comfort temperature is active).
Briefly press the “PROG” key to confirm the starting time.
• On the LC display the time when the lowering temperature is to be activated
is displayed:
56
s¬4HE¬TIME¬WHEN¬THE¬COMFORT¬TEMPERATURE¬WILL¬BE¬SWITCHED¬
ON¬IS¬DISPLAYED
MO DI
MI DO FR SA SO
0
6
12
18
24
Prog
Use the selection wheel to select the time when control of
the comfort temperature is to be started. On the bottom of
THE¬,#¬DISPLAY¬A¬SCALE¬IS¬DISPLAYED¬TO¬FACILITATE¬ORIENTATION¬
(long marks = comfort temperature is active).
Briefly press the “PROG” key to confirm the starting time.
s¬/N¬THE¬,#¬DISPLAY¬THE¬TIME¬WHEN¬THE¬LOWERING¬TEMPERATURE¬
IS¬TO¬BE¬ACTIVATED¬IS¬DISPLAYED
MO DI
MI DO FR SA SO
0
6
12
18
24
Prog
Use the selection wheel to select the time when control of
the lowering temperature is to be started.
Briefly press the “PROG” key to confirm the starting time.
s¬2EPEAT¬THE¬STEPS¬DESCRIBED¬ABOVE¬TO¬PROGRAM¬THE¬SECOND¬
comfort temperature time and the second lowering temper-
ature time.
If one of the switching times is not to be used, turn the selec-
TION¬WHEEL¬TO¬THE¬RIGHT¬SIDE¬UNTIL¬FOUR¬BARS¬ARE¬DISPLAYED¬hv¬
BARS¬ ARE¬ DISPLAYED¬ NEXT¬ TO¬ THE¬ DISPLAYED¬ TIME¬ ¬ HRS
Use the selection wheel to select the time when control of the lowering
temperature is to be started.
Briefly press the “PROG” key to confirm the starting time.
• Repeat the steps described above to program the second comfort
temperature time and the second lowering temperature time.
If one of the switching times is not to be used, turn the selection wheel to the
right side until four bars are displayed (“--:--”, bars are displayed next to the
displayed time 23:50 hrs).
57
MO DI
MI DO FR SA SO
0
6
12
18
24
Prog
)F¬ YOU¬ SET¬ THE¬ SECOND¬ COMFORT¬ TEMPERATURE¬ TIME¬ TO¬ uh¬
the setting of the second lowering temperature time is irrel-
evant, since no data are changed.
In all, you may set two periods of time for comfort temper-
ature, e.g. from 6.00 to 9.00 hrs and from 16.00 to 23.00
hrs.
After setting of the second lowering temperature time and
confirming the setting by pressing the „PROG” key the nor-
mal operating mode is active again.
4HE¬SCALE¬DISPLAYED¬ON¬THE¬BOTTOM¬OF¬THE¬,#¬DISPLAY¬FOLLOWS¬
the changes as they are being made, i.e. the effect on the
day profile is immediately visible.
Please note that the temperature at the end of the previ-
ous day is not displayed. This means that it may be that
the heating phase at the end of the previous day is con-
tinued the next day. However, this is not displayed during
programming!
C ¬/PERATING¬MODES
Press the “FUNKTION” key to change the operating mode.
Press this key several times to scroll through the different
OPERATING¬MODES
Automatikbetrieb
Manueller Betrieb
Urlaub/Party-
Funktion
Automatic operation
Manual operation
Holiday/party
function
If you set the second comfort temperature time to „--:--“ the setting of the
second lowering temperature time is irrelevant, since no data are changed.
In all, you may set two periods of time for comfort temperature, e.g. from 6.00
to 9.00 hrs and from 16.00 to 23.00 hrs.
After setting of the second lowering temperature time and confirming the
setting by pressing the „PROG” key the normal operating mode is active
again.
17
