ECO CHOICE ECO-ADV-PS35 Owner'S Manual Download Page 40

Page: 40 / 40

7058-206E

August 30, 2016

DO NOT DISCARD THIS MANUAL

CAUTION

• Important operating and

maintenance instruc-

tions included.

•

Leave this manual with

party responsible for use

and operation.

•

Read, understand and

follow these instruc-

tions for safe installa-

tion and operation.

DO NOT

DISCARD

CONTACT INFORMATION

Hearth & Home Technologies

1445 North Highway

Colville, WA 99114

Division of HNI INDUSTRIES

Please contact your Heatilator dealer with any questions or concerns.

For the number of your nearest Heatilator dealer

log onto www.heatilator.com

This product may be covered by one or more of the following patents: (United States) 5341794, 5263471, 6688302, 7216645, 7047962

or other U.S. and foreign patents pending.

We recommend that you record the following pertinent

information for your heating appliance.

Date purchased/installed:

Serial Number:

Location on appliance:

Dealership purchased from:

Dealer phone:

Notes:

Summary of Contents for ECO-ADV-PS35









































Search results

Summary of Contents for ECO-ADV-PS35

Reviews:

Related manuals for ECO-ADV-PS35

Brands by name

Popular brands

ECO CHOICE ECO-ADV-PS35, Owner'S Manual

Search results

Summary of Contents for ECO-ADV-PS35

Reviews:

Related manuals for ECO-ADV-PS35

Brands by name

Popular brands