ECO CHOICE ECO-ADV-PS35 Owner'S Manual Download Page 1

Page: 1 / 40

7058-206E

August 30, 2016

NOTICE: DO NOT DISCARD THIS MANUAL

Owner’s Manual

Operation & Care

INSTALLER: Leave this manual with party responsible for use and operation.

OWNER: Retain this manual for future reference.

Contact your dealer with questions on installation, operation, or service.

HOT SURFACES!

Glass and other surfaces are hot

during operation AND cool down.

Hot glass will cause burns.

•

Do not touch glass until it is cooled

•

NEVER allow children to touch glass

•

Keep children away

•

CAREFULLY SUPERVISE children in same room as

fireplace.

•

Alert children and adults to hazards of high temperatures

• High temperatures may ignite clothing or other

flammable materials.

•

Keep clothing, furniture, draperies and other flammable

materials away.

WARNING

If the information in these instruc-

tions is not followed exactly, a

fire could result causing property

damage, personal injury, or death.

• Do not store or use gasoline or other flam-

mable vapors and liquids in the vicinity of

this or any other appliance.

• Do not overfire - If heater or chimney con-

nector glows, you are overfiring. Overfiring

will void your warranty.

• Comply with all minimum clearances to

combustibles as specified. Failure to

comply may cause house fire.

WARNING

CAUTION

Tested and approved for wood pellets. Burning of any

other type of fuel voids your warranty.

NOTE

To obtain a French translation of this manual, please contact

your dealer or visit www.heatilator.com

Pour obtenir une traduction française de ce manuel, s’il vous

plaît contacter votre revendeur ou visitez www.heatilator.com

CAUTION

Check building codes prior to installation.

• Installation MUST comply with local, regional, state and na-

tional codes and regulations.

• Consult local building, fire officials or authorities having juris-

diction about restrictions, installation inspection, and permits.

PELLET BURNING STOVES

Model(s):

ECO-ADV-PS35

ECO-ADV-PS50

ECO-CAB50

Summary of Contents for ECO-ADV-PS35









































Search results

Summary of Contents for ECO-ADV-PS35

Reviews:

Related manuals for ECO-ADV-PS35

Brands by name

Popular brands

ECO CHOICE ECO-ADV-PS35, Owner'S Manual

Search results

Summary of Contents for ECO-ADV-PS35

Reviews:

Related manuals for ECO-ADV-PS35

Brands by name

Popular brands