23
6.3 Dispensing of hot water
1
Place an adequate water container (with a heat-insulated handle) under the hot water dispenser.
2
You can start dispensing hot water by pressing the hot water button. When done, press the button again.
Caution!
Place the nozzle of the dispenser into the water container in order to avoid injuries due to hot water
sprayings.
The cold water mixing valve allows for an individual adjustment of the hot water temperature (pic). The adjustment
is to be carried out by authorised service personnel only.
6.4 Dispensing of steam
The Controvento Due makes it possible to generate steam in order to heat or froth liquids, e. g. milk or punch. It is a
professional espresso coffee machine with an enormous steam volume. Therfore, within a few seconds you can
prepare milk froth. Please pay attention to the instructions below. Do not bring the milk to a boil, otherwise the milk
froth will dissipate.
1
Important:
In order to get the best result when frothing milk, open the steam lever for approx. 5 seconds,
releasing condensed water and to attain dry steam. Then close the steam lever again.
2
Immerse the steam nozzle (at the end of the steam dispenser) into the liquid.
3
Re-open the steam lever.
4
Heat and/or froth the liquid.
5
After frothing or heating, release the steam into the drip tray to keep the holes of the steam nozzle clean.
Risk of injury
Always keep the steam nozzle underneath the surface of the liquid while heating or frothing in order
to avoid sprayings.
Important
Clean the steam nozzle and the steam dispenser with a non-abrasive, damp cloth after every
application. This removes possible liquid residues before they solidify.
Risk of injury
Avoid skin contact with the steam dispenser while cleaning!
adjustment screw
Summary of Contents for controvento due 87674
Page 1: ......
