Bedienungsanleitung / User Manual/ Handleiding/
Руководство
по
эксплуатации
SYNCHRONIKA
ENGLISH
25
4.2 Electrical connection
x
Make sure that the local main voltage supply corresponds to the information given on the type
plate on the front panel of the espresso machine.
x
Plug the machine into a grounded socket only and do not leave it unattended.
x
Do not roll or bend the power cord.
x
Do not use an extension cord/ do not use a multiple socket.
4.3 Water supply connection
Important
Make sure that the water connection line of the machine is connected to a potable water supply
with an operating pressure of max. 2 bars. In case of an operating pressure of more than 2 bars, use
a pressure regulator.
Please note that often times the pressure of the water supply may vary. If the water supply pressure
temporarily exceeds 2 bars, use a pressure regulator. Furthermore, a
shut-off valve
should be used.
This valve should be located where it is easily reached, so that the water supply can be interrupted
at any time.
Position “0”: water tank
Position “1”: direct water connection
Machine in use with a direct water connection
The water connecting hose is to be connected to the water supply adapter (image 1) at the bottom panel of the
machine.
When using the machine with direct water supply, the valve has to be turned towards the opposite side of the water
supply adapter opening (image 1). The water supply adapter is located in the rear part of the bottom panel (image
1). Additionally, place the switch behind the drip tray into position “1” (image 2).
Before use, please make sure that
your water tap is always open during water-connection usage so that the machine never runs out of water!
Image 1
Image 2
Valve in position
“1”
for operating
machine with direct water
connection
Place switch into position “1” for
direct water connection
Water supply adapter
Important
Do not leave the machine switched on or unattended when not in use.
Make sure to close the
shut off valve
of the water connection and to switch off the electric main
switch or to disconnect the power plug when the machine is not in use.