ECM Manufacture Casa IV, Instruction Manual

Page: 28 / 57

ENGLISH
Instruction manual CASA
27
This product complies with EU Directive 2002/96/EC and is registered according to WEEE (Waste Electrical and
Electronic Equipment).
10 CE CONFORMITY
Conformity
The product complies with the following EU Directives:
Machine:
98/37/EC
Low Voltage: 73/23/EEC, 93/68/EEC
EMC: 89/336/EEC, 93/68/EEC, 92/31/EEC
PED: 97/23/EC
EN-Directives: EN 292-1, EN 292-2, EN 60335-1, EN 60335-2-15 or EN 60335-2-75, EN 55014, EN 61000-3,
EN 61000-4, ENV 50141, EN 55104
11 TROUBLE SHOOTING
Problem Possible Cause Trouble-shooting
The grinding degree is not fine
enough
Use a finer grinding degree
Tamp the ground coffee more firmly
Reduce the brewing pressure
The coffee mixture is too old Use fresh coffee
There is too much chlorine in the
water
Use a chlorine filter
The amount of ground coffee is not
enough Take the right coffee amount
Use approx. 7 g of coffee for each
cup
Little or no crema on the top of the
coffee
The net filter is dirty Clean the brewing group
The grinding is too fine
Increase the grinding degree
Tamp the ground coffee only slightly
Increase the brewing pressure
There is too much ground coffee
Use approx. 7 g of coffee for every
cup
Sparse coffee dispensing, only drop
by drop
The water tank is empty Refill the water tank
The grinding degree is not fine
enough
Reduce the grinding degree
The coffee is old Use fresh coffee
The amount of ground coffee is not
enough Use approx. 7 g of coffee for each
cup
Weak “body”
The net filter is dirty Clean the net filter
The coffee mixture is improper Use another coffee mixture
Foam instead of crema
The grinding degree of the coffee
grinder is not suited for the coffee
mixture in use
Adjust the coffee grinder (When
changing the coffee mixture,
changing the grinding degree can
also be necessary)
Water shortage in the water tank Refill the water tank with water
The boiler is empty after steam
dispension Refill the boiler after steam
dispension
Machine is switched on, but no
water is released from the brewing
group.
The water tank is not fixed properly Fix the water tank properly
The steam switch is switched on Switch off the steam switch Brewing group releases steam/
temperature for coffee preparation is
too high
Watertank is empty
Refill the watertank and release
water aout of the group
The boiler is empty Refill the boiler The steam dispension does not
work.
The nozzle is blocked Clean the nozzle
The filter is blocked Clean the filter
The coffee dispension is irregular.
The grinding degree is not correct Change the grinding degree
If the machine has not been used for a longer period of time, it is recommended to