ThE aVEragE raTE OF FirE
when the Average rof is selected
for display the run screen will look
something like the screen to the right.
the value displayed in the top left of
the screen represents the number of full
cycles completed in the last second -
the average rate of fire over the second.
the number below it is the maximum
average rate of fire that has been
recorded. to reset this maximum, press
and hold the button for 0.5 seconds.
ThE pEaK raTE OF FirE
when the peak rof is selected for
display the run screen will look
something like the screen to the left,
which differs from the display of the
Average rof by the inclusion of the
indicator ‘pk’. the value displayed in the
top left of the screen represents the
rate of fire measured between the last
two shots. the number below it is the
maximum peak rate of fire that has been
recorded. to reset this maximum, press
and hold the button for 0.5 seconds.
the peak rof is typically higher than the
Average rof as it is much easier to fire
two shots in quick succession than it is
to maintain a string over a longer period
of time.
ThE MENU sYsTEM
behind the run screen is a structured menu system
comprised of multiple levels of menus. each menu
contains a number of menu items and each menu
item can either be an editable parameter or a branch
to another menu. branches always have an animated
graphic whereas parameters indicate their current
value.
the menu structure is shown in the following pages.
the menus are ‘smart menus’ in that they will expand
and contract depending upon the state of certain
parameters. for example, the
Max rOF
parameter is
only visible when the
rOF cap
parameter is set to ‘on’.
smart menu items are indicated with a * in the table
below.
UNdErsTaNdiNg ThE
lOcK iNdicaTOr
the Geo has a tournament lock which prevents the
user from making changes to any parameter that
affects the way in which the Geo shoots, without the
need for tools. this feature is necessary in order to make
the Geo legal for tournament play.
when the lock is enabled the lock indictor will show a
closed padlock .
when the lock is disabled the lock indictor will show an
open padlock .
UNdErsTaNdiNg ThE
BaTTErY lEVEl iNdicaTOr
the battery level indicator is used to show the state of
the battery within the Geo. when the battery is fresh
the indicator will show a ‘full’ battery and as the
battery is drained, so the indicator will show the battery
emptying. when the battery reaches a point at which
the Geo will no longer function reliably, the indicator
will start to flash. At this point the battery must be
changed immediately.
ThE gaME TiMEr
when the Game timer is shown on the run screen
then it can be started by pressing the button and
the timer will start to count down. the Game timer can
also be configured to start on a trigger press with the
sTarT
parameter (see page 35).
when the Game timer reaches the
alarM
time the
Gamer timer will start to flash and the audible alarm
will sound every second, provided that the
sOUNd
parameter is on.
when the Game timer reaches 00:00,
GAme over will be displayed and the
audible alarm will sound continually,
provided that the
sOUNd
parameter is
set to ‘on’.
to stop the Game timer at any time
press and hold the button for 0.5
seconds.
to reset the Game timer to it’s preset
start time, push and hold the button
for 1 second. the Game timer will also be
reset whenever the Geo is switched off.
ThE shOT cOUNTEr
the shot counter increments every
time that the Geo is fired, regardless of
whether the shot counter is displayed or
not. when the shot counter is displayed
on the run screen it can be reset to 0 by
pressing and holding the button for
0.5 seconds.
TYpical
BraNch
TYpical
paraMETEr
U
SI
N
G
Y
O
U
R
G
EO
26.
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR GEO
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
27.
U
SI
N
G
Y
O
U
R
G
EO
USING YOUR GEO
QUicK gUidE
Summary of Contents for GEO
Page 1: ......
