Eclipse CD5435 Owner'S Manual Download

Page: 103 / 128

103

How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only)

Preset channel scan

This function enables reception of all the channels in the preset buttons
for five seconds each.

Press the [SEL] button for less than two seconds.

[P SCAN] will appear at the display, and channels stored under
preset buttons [1] through [6] will be played for five seconds each.

To stop the preset scan mode at a desired channel, press
the [SEL] button again.

The receiver will stay tuned to the desired channel.

Switching displays when using the SIRIUS satellite
radio

Press the [DISP] button for more than one second.

Each time the button is pressed the display item changes in the
following order:
channel name

➔

category name

➔

title

➔

artist

➔

SIRIUS unit ID.

●

The maximum number of characters that can be displayed for
each item is as follows:
Title: 38 characters
Artist: 38 characters
Channel: 20 characters
Category: 16 characters

●

If there is no name, NO_ DATA will appear.

[SEL] button

Buttons [1] to [6]

[DISP] button

CD5435.book 103 ページ２００４年１２月１１日　土曜日　午後５時２９分

Summary of Contents for CD5435

































































































































Search results

Summary of Contents for CD5435

Reviews:

Related manuals for CD5435

Brands by name

Popular brands

Eclipse CD5435, Owner'S Manual

Search results

Summary of Contents for CD5435

Reviews:

Related manuals for CD5435

Brands by name

Popular brands