Eclipse CD3403 Owner'S Manual Download

Page: 13 / 70

Operating precautions

About borrowed CDs

• Do not use a CD with glue or

remnants of adhesive tape or
labels. They may cause the CD
to get stuck inside or damage
the deck.

How to remove CDs

• When removing the ejected disc,

pull it straight out along the slot.
Pressing downward in the
process may scratch the
recorded surface of the disc.

OKAY

NO GOOD

About irregularly-shaped CDs

• Specially-shaped CDs, like

heart-shaped or octagonal CDs,
cannot be played. Do not
attempt to play them, even with
an adapter, since they may
damage the player.

• Use a commercially available compact disc

cleaner to clean a CD, wiping lightly from the
center to the edge.

• Do not use benzine, thinner, LP record spray

or other cleaners on CDs. They may damage
a CD’s finish.

XXXX

About cleaning a CD

Summary of Contents for CD3403







































































Search results

Summary of Contents for CD3403

Reviews:

Related manuals for CD3403

Brands by name

Popular brands

Eclipse CD3403, Owner'S Manual

Search results

Summary of Contents for CD3403

Reviews:

Related manuals for CD3403

Brands by name

Popular brands