Eclipse CD3403 Owner'S Manual Download | Manualshive

Page: 2 / 70

background image

For your safety in using the

CD3403

Warnings and caution signs, illustrated below, are posted
throughout this manual as well as on the CD3403. They show safe
and correct ways to handle the product so as to prevent personal
injury to you and others and avoid damage to property.

Before reading through the manual, take time to read through and
learn the important information listed in this section.

This sign indicates a situation in which
incorrect handling through disregard of a sign
might result in death or serious personal injury.

This sign indicates a situation in which
incorrect handling through disregard of a sign
might result in personal injury or may result
solely in damage to property.

• Do not modify this system for use other than that specified

herein. Also, do not deviate from the installation procedures
described herein; Eclipse will not be held liable for damages
including, but not limited to serious injury, death or property
damage resulting from installations that enable unintended
operation.

• This unit is intended for operation in DC 12-volt, negative-

grounded vehicles only. Never use it in 24-volt vehicles such as
heavy trucks or diesel cars with cold-region specifications.

• Do not change CDs while driving. Doing so may result in an

accident.

Warning

Caution

Warning

2

«
1
2
3
4
...
»

Summary of Contents for CD3403







































































Reviews:

No comments

Related manuals for CD3403

Brand: La Gard Pages: 2

Brand: LENCO Pages: 27

Brand: 3M Pages: 2

Brand: 3M Pages: 2

Mobile Video System

Brand: Farenheit Pages: 51

Brand: Parrot Products Pages: 8

Brand: Parrot Pages: 102

Brand: VDO Pages: 2

Brand: N-Com Pages: 32

LARDIS:ONE LAR-1192

Brand: LARDIS Pages: 22

Brand: Magnavox Pages: 24

Brand: Benwin Pages: 7

Collaborate FHD

Brand: ClearOne Pages: 82

Brand: Boss Audio Systems Pages: 19

Brand: Uniden Pages: 132

Brand: Audiovox Pages: 4

Brand: Opus Technologies Pages: 16

Brand: auna multimedia Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands