22
Basic operation
Listening to the tuner
Press the [FM AM] button.
1
This will turn the tuner on.
Press the [FM AM] button to switch to the desired FM or
AM bands.
2
Radio bands will switch from FM1
➔
FM2
➔
FM3
➔
AM in
order each time the button is pressed.
Turn the [SEL] button to the left or right to tune to a
station.
3
Turn to the right: Turnes to higher frequencies.
Turn to the leftt: Turnes to lower frequencies.
Press the [SEEK
/FAST
] button to start the automatic
station search.
4
[SEEK
] button: Starts searching toward higher frequencies.
[FAST
] button: Starts searching toward lower frequencies
ATTENTION
If stations have been stored in memory, pressing a button
from [1] to [6] will directly select a station. (Refer to the section
“Manually setting stations into memory” on page 40)
[SEEK
] button
[AUDIO CONTROL] button
[FM AM] button
[FAST
] button
[SEL]
button
Warning
Adjusting audio volume
Turn the [AUDIO CONTROL] button to the left or right.
1
Turn to the right: Increases the volume.
Turn to the left:
Decreases the volume.
Do not adjust the volume or other controls while driving the
vehicle. Do so only while parked in a safe location.
Buttons [1] to [6]
