background image

- 4 -

Deutsc

h

English

E

spañol

Français

Italiano

Nederlands

Svenska

Once installation and wiring have been completed, return
the brakes and electrical equipment such as lights, horn,
hazard warning lights and turn signal lights to their original
places, and check that they operate correctly. If you use the
vehicle while any of this equipment is not working correctly,
fire, electric shocks or accidents may occur.

Use supplied cable harness with this main unit.
Other manufacturers may use a similar cable harness
connector but pin configurations are incorrect for use with
ECLIPSE main units and can damage the main unit. Prior to
powering up the main unit, please make sure the main unit
is properly earthed with the   vehicle chassis. If no earth is
available to the chassis, add an earthing strap from the
main unit to the vehicle chassis to improve the earthing.

Do not use with speakers having 1 to 3 ohms impedance.
This main unit is designed to be used with high-powered
speakers rated above
50 W with impedance rating between 4 and 8 ohms.

For best results, this main unit should be installed by a
professional installer. 
Contact the dealer whom you purchased the main unit for
an appointment.

When installing this main unit, be sure to use the supplied
mounting hardware. If parts other than those supplied are
used, the main unit may be damaged internally, or may not
be held in place securely and become dislodged.

Avoid installing this main unit in places where it may get
wet, such as near windows, or in places that are moist or
dusty. Presence of liquid, moisture, or dust inside this main
unit can cause short circuiting resulting in smoke or fire.

If this main unit is not connected properly, a short circuit,
fire, or accident may occur.

When routing cables, use precautions to prevent contact of
sharp metal parts such as brackets or screw tips.
Otherwise, a short circuit, electric shock, fire, or accident
may result.

Play the audio at a moderate volume level that permits you
to hear sounds from outside the vehicle. Driving without
being able to hear outside sounds may result in an
accident.

This main unit must be operated only as an on-board main
unit, or it may cause electrical shock or injury.

Do not play distorted sounds for long periods of time; the
speakers may overheat and cause a fire.

Summary of Contents for AVN4429
















Reviews: