background image

- 10 -

Deutsc

h

English

E

spañol

Français

Italiano

Nederlands

Svenska

Never cut the insulation on the power cable or use it to power any other main unit. If the rated current capacity of
the power cable is exceeded, fire and electric shocks may result.

The cables should be secured with tape or a similar securing method to prevent any obstructions while driving. If
they get wound or entangled around components such as the steering wheel, shifting lever, or brake pedal,
accidents may result.

If removing the end of the cable to connect to another cable, be sure to wrap PVC tape or a similar cable insulating
method around the connection to insulate it. If the connection is not insulated, fire or accidents may result.

Install and connect all of the peripheral units before connecting them to the main unit.

Do not remove any of the protective caps (RCA, etc.) unless in use.

Be sure to wrap the connection cables with tape (PVC tape) to insulate them.

Be sure to grip the connector’s body. Rough tugging may result in broken wires or harnesses.

Tip

System connection e

System connection e

xample

xample

1

TO EARTH

TO VEHICLE SPEED PULSE SIGNAL
TERMINAL (Refer to page 8)

Green

ANTENNA PLUG

1P

16P

iPC409

(Sold separately)

8

Black

7

2

TO VEHICLE-SIDE
CONNECTOR

13P

TO STEERING REMOTE CONTROL

Blue

Blue/White

TO TURN-ON LEAD OF EACH UNIT 
(Supply)

TO POWER ANTENNA RELAY (Supply)

Pink

7

14P

16P

3

4

FRONT
REAR
(Remove caps when using external amplifier)

NOT FOR USE

BEC108

(Sold separately)

4P

TO PARKING BRAKE  SIGNAL 

(Refer to page 8)

TO REVERSE SIGNAL
(Refer to page 9)

Red/White

Purple/White

iPod

TO USB DEVICE

TO SUB-WOOFER
(Remove caps when using external sub-woofer)

TO EXTERNAL VIDEO EQUIPMENT
(Remove caps when using external video equipment)

AUX105
(Sold separately)

TO THE RCA OUTPUT
CONNECTORS OF
EXTERNAL EQUIPMENT
(MP3 PLAYER, 
MD PLAYER, etc.)

R SIDE (Red)

L SIDE (White)

Summary of Contents for AVN4429
















Reviews: