Eclipse Security Tribrid, User Manual

Page: 103 / 266

H
DCVI Standalone DVR User’s Manual
94
Figure 4-54
4.10.1.3 Encode
It is to set video bit stream, picture bit stream, video overlay param eter and etc.
4.10.1.3.1 Video
Video setting includes the following items. See Figure 4-55.

Channel: Select the channel you want.

Type: Please select from the dropdown list. There are three options: regular/motion
detect/alarm. You can set the various encode parameters for different record types.

Compression: System supports H.264 and MJPEG.

Resolution: System supports various resolutions, you can select from the dropdown
list. Please note the option may vary due to different series.

Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode.

Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set
video quality.

Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image
quality.

Video/audio: You can enable or disable the video/audio.

Audio format: Please select from the dropdown list. There are three options:
G711a/G711u/PCM

Audio source: Please select from the dropdown list. There are two options:
normal/HDCVI. For normal mode, the audio signal is from the Audio In port. For
HDCVI mode, the audio signal is from the coaxial cable of the camera.