USER MANUAL
–
Page
8
of
18
INMANUUIN155 Rev.2019.02.14 / ENG
CONSTITUENT PARTS OF THE VACUUM
TRAP
1. Button On / Stop Vacuum circuit.
2. Button for menu selection.
3. Menu selection button DOWN.
4. Menu selection button UP.
5. Button ON cleaning cycle.
4. INSTALLATION AND START UP
The connection and revision of the equipment must be carried out by technical personnel with
knowledge of the electrical installation from where the equipment will be connected.
1. Unpack the equipment carefully.
2. Place it on a flat surface.
3. Connect the power cord and pedal and verify that the pneumatic connections on the rear
panel are correct and that the double vacuum trap is assembled correctly.
1
2 3 4 5
