USER MANUAL
–
Page
12
of
18
INMANUUIN155 Rev.2019.02.14 / ENG
Before beginning a cleaning cycle, verify that the vacuum trap on the rear panel is free in
order to place the cleaning waste.
5.2. DIAMOND TIP CHANGE
The equipment has several tips with different levels of abrasion, determined by the type of
diamond that it contains in the tip. To identify the different diamonds, the tips have a colored
rubber band that identifies them.
1. To change the tip of the applicator, grasp the tip of the applicator and turn the tip
counterclockwise.
2. Remove the tip.
3. Place the desired tip on the tip of the applicator.
Verify that the base of the tip is aligned with the applicator so that the thread does not
enter twisted to avoid any damage in the thread entry or the threads of it.
4. Press the tip and simultaneously screw in clockwise.
5. Verify that the tip base fully settles on the applicator.
The tip should be completely placed, without any space between it and applicator body. Is
not necessary to adjust with excessive force.
